SureCoat Manufactured Home Repair Products

The SureCoat Roof and Wall Systems are single-component, epoxy hybrid, energy-efficient, cool roof and cool wall systems for use on manufactured homes (including mobile homes). Manufactured homes are typically not well insulated. The SureCoat Roof and SureCoat Wall Systems will aid in the radiant heat effect to a manufactured home without the need of drilling or tearing into the walls. Both the SureCoat Roof System (bright white, waterproof coating with 81% solar reflectance) and StrucSureCoat (available in 27 standard colors) have a 93% thermal emittance value, allowing very little heat to penetrate the home to which it is applied.

Sure-A-Thane is a cross-linked, single component, reflective, energy-saving coating that is made specifically for flat and low sloped roofs that pond water. The low perm rating of .019 keeps water on the surface of the roof, and does not allow penetration into roof materials or the roof deck. Waterproofing the roof while emitting 93% of the heat and reflecting 81% of the solar UV rays keeps the interior space cooler. The highly reflective nature of Sure-a-thane makes this seamless, self-adhered, self-flashing coating product perfect for Manufactured Homes. The high viscosity and high solid content make Sure-a-thane a great value for the cost. Every gallon leaves almost 10.5 dry mils per gallon per square. Sure-a-thane stacks so well, it is easy to get 2-3 gallons per square of material on in one pass. Sure-A-Thane is distributed in 5 gallon pails for residential applications.

SureKlean is a fresh smelling, biodegradable cleaner made to clean and etch existing roof materials, especially those with an existing membrane. SureKlean is used prior to the application of Sure-a-thane when installing The SureCoat Roof System. SureKlean is used to remove the UV degradation of factory applied glaze or dirt, and to etch the surface properly to insure excellent adhesion of the SureCoat roof coating. Special equipment is not necessary to use SureKlean or any of SureCoat Systems’ repair products. SureKlean is used to clean metals; including sheet metal, Kynar, aluminum and steel, as well as TPO, PVC, EDPM, Hypalon, and many other rubbers and metals. SureKlean can also be used to remove old mastic repairs from a roof. SureKlean is distributed in 5 gallon pails for residential applications.